SPL 2Control

Speaker & headphone monitoring controller.

2CONTROL

Product lists can be submitted to HHB for a packaged quotation

Add to Product List
Add to Product List

 

The 2Control is an excellent sounding compact monitor controller.
 
The Crossfeed makes the playback headphones sound as being played back on speakers. Your mixes on headphone translate better to speaker playback.
 
The 2Control combines loudspeaker and headphone monitoring in a compact, user-friendly and high quality control device. Control near-field and full-range monitors as well as headphone monitoring for two listeners in one central device.
 
The 2Control allows for connection of two sources, two stereo speaker sets and two headphones. Each of the three speaker outputs (2 stereo sets, 1 x mono speaker) is driven by its own balancing stage. Each headphone output is supplied by a separate amplifier to allow for completely independent operation of two headphones.
 

 

A majority of D/A converters and sound cards do not provide analog monitoring level control. Instead they lower the bit rate, which leads to a loss of audio quality.
The advantages of an analog monitoring controller become especially apparent in combination with modern audio and video production tools such as ProTools™, Nuendo™, Cubase™, Logic™, Deck™, etc. Monitor levels and source management can be handled independently of the software and with virtually no loss in quality. In addition, you won’t have to worry about over- or underdriving the converters when changing monitor levels.
Volume is controlled with a high-quality potentiometer (ALPS RK27 “Big Blue”) and active electronics. In contrast to passive circuits, the 2Control’s active design does not influence impedances when levels change. Altering impedances would again have negative effects on the frequency response, so the 2Control’s active design guarantees linearity.
 
Volume is controlled with a high-quality potentiometer (ALPS RK27 “Big Blue”) and active electronics. In contrast to passive circuits, the 2Control’s active design does not influence impedances when levels change. Altering impedances would again have negative effects on the frequency response, so the 2Control’s active design guarantees linearity.